Wouldn't change my oil without Flushing it with Motor Flush first.

Comments about West Marine Outboard Motor Flusher, OB/IB, Universal with Rectangular Cups:

Shoreline Marine Motor Flusher Dual Flow

Too low to display
  • Review
  • TAG : Motor Flushers | Big Water Marine
ADD TO CART
  • A: I would not suggest you for the Liquid Wrench High-Mileage 5-Minute Motor Flush as this works to remove sludge and varnish to free sticky valves, rings and drain passages. You may have an issue with the drain valve in the oil filter housing, but it sounds most like a bad gerator pump (low pressure oil pump). However, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.

    A: This Liquid Wrench High-Mileage 5-Minute Motor Flush - part# MF3 should work fine for your application as it works to remove sludge and varnish to free sticky valves, rings and drain passages. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

  • A: Hi Kyle, the Motor Medic Motor Flush (Part No. MF3) directions are as follows: 1. Check to make certain oil in crankcase is up to safe level. 2. Add MOTORMEDIC Motor Flush to cold engine before changing oil and filter. Idle engine at normal speed for 5 minutes. DO NOT DRIVE THE VEHICLE. MOTORMEDIC Motor Flush will circulate throughout the entire lubricating system of your engine dissolving sludge, gums and varnishes from engine and oil pan. It also frees sticking valves and rings. 3. Drain crankcase and remove oil filter. Replace drain plug and install new oil filter. NOTE: On engines with 75,000 miles or excessive deposits, remove and clean the oil pan to minimize the risk of engine damage. 4. Refill crankcase with oil. NOTE: Extremely dirty engines may require repeat treatment. Follow directions 1 to 4.

    A: Hi Ace, happy to help! Motor flush is used for the removal of accumulated gums, varnishes and sludge from internal engine parts Circulated through the engine for 5 minutes before an oil change and especially before changing the oil filter, motor flush will free sticky valves and piston rings allowing oil to circulate freely to all parts of the motor Easy pour bottle 32 oz.

    Main > Engine Parts > Motor Flushers > Flushing Kit

    • Questions & Answers about Moeller Flushrite Boat Motor Flushers:
        • 2013-04-14 A shopper asked:
          Which unit would fit a 15HP Yamaha (2stroke) engine?
        • +Expand Answers
        • 2012-05-06 A shopper asked:
          Will this work on a Mastercraft Inboard ski boat. Can I run the boat out of water briefly with this device?
        • +Expand Answers

    A: Hi Eggs, good question! Yes, the oil can be drained after the motor flush is used and your crackcase will not be overfilled. You can follow these directions while using this flush. Check that the engine oil is at a safe level of operation. Then add motor flush to a cold engine before changing the filter and oil. Idle engine at normal speed for 5 minutes. The motor flush will circulate throughout the entire lubricating system of your engine removing sludge, gums and varnishes from the engine and oil pan. It also frees the sticking valves and rings. Then drain oil and remove the oil filter. Finally replace the filter and drain plug and refill engine with new oil.

Motor Flushers Archives - Mystic Marine Discounts

For this reduced price, the Universal Outboard Boat Engine Motor Flusher Round Muff Cups - Five Oceans comes widely respected and is a regular choice amongst lots of people. FIVE OCEANS have included some great touches and this equals great value for money.